Check TPMS System Honda Civic 2012
To avoid the hassle of constantly checking your car’s tires, you should consider buying a TPMS-enabled model.
All 2012 Civic cars come equipped with this safety feature and will let drivers know when they need more air or have low pressures in at least one tire!
The most straightforward approach to check TPMS system honda civic 2012 is to fill your tires with air until they reach the required pressure.
It isn’t always that simple, though.
We’ve all been in a situation where we’ve pumped up the tires only to have the tire pressure warning illuminate on the dashboard.
If the tire pressures are low, you must reset the TPMS.
In this article, we’ll show you how to reset your Honda Civic’s TPMS in simple terms.
What Does TPMS Stand For On A Honda?
TPMS is a great way to help keep your car in top condition by checking the pressure of all four tires.
All models since 2008 have been equipped with this technology, which works using sensors that tell us how much air each one needs!
The pressure sensors on each wheel send data to the car’s computer which checks for low tire pressures and sends an alert.
If 25% or more below recommended levels, warning lights will illuminate within your instrument panel!
Depending on the make and model of your car, you may also get a message to display maintenance information.
When Should Your TPMS Be Reset?
The TPMS is a safety device that helps keep you safe on the road.
If it isn’t reset at certain times, then this could cause inaccurate readings which might lead to dangerous situations like driving around with under-inflated tires or overinflation!
Have you forgotten when to reset your TPMS in a Honda Civic 2012?
Here’s the scoop:
Although this is a very simple procedure, you should know that it will void your vehicle’s factory warranty.
Make sure to check the owner’s handbook for more information.
When inflating your tires, remember to reset the TPMS system after they’ve been inflated – otherwise, the new tire pressure may be inaccurate.
The TPMS will need to be reset when you replace the tires.
When changing the tires, once again, the TPMS will need to be reset.
When one or more of the tires is changed – After your tires are rotated, the TPMS must be reset.
The sensors in your car tires need to be reset when they are done being worked on.
If this doesn’t happen, the TPMS won’t read accurately and you could end up with under or over-inflated pressure for a tire which can lead to poor handling as well as a danger during driving conditions such as rainstorms since more air would have been pumped into one than what’s needed!
The TPMS is a safety device.
If it isn’t reset, then that pesky warning light will continue to think you are driving on tires with low air pressure and turn itself off anytime soon!
Have you ever wondered how to check or reset the TPMS in your Honda?
Don’t worry, we’ve got a simple step-by-step guide coming up next!
How to Reset/Check TPMS System Honda Civic 2012
It’s also a good idea to use some sort of lubricant, like graphite.
Be sure not to overfill the tire.
It’s easy enough to do by following the instructions in your owner’s handbook, which you should have handy after inflating them with your compressor.
Some cars feature a reset button for the TPMS system; this is not the case with a 2012 Honda Civic.
The TPMS can be reset on a Honda Civic 2012 by driving it at speeds of 25 mph or more for a short time.
When the TPMS warning light is turned off after driving at speeds of 25 mph or more, you’ve succeeded.
Unfortunately, it may be difficult to reset the TPMS in your Honda Civic after you’ve added air to your tires using the method outlined above.
If you want to turn off the TPMS light in your Honda Civic, follow our easy-to-follow instructions below.
Step 1 – Fill the tires to the proper air pressure. The correct air pressure for a 2012 Honda Civic is 32 psi.
Step 2 – Locate the menu button and joypad on the steering wheel while the car is switched on.
Step 3 – Using the MENU button on the steering wheel, go to Step 4.
Step 4 – To access CUSTOMIZE SETTINGS, use the down arrow on the joypad and scroll down.
Step 5 – To access the customize settings menu, press SOURCE.
Step 6 – Scroll down to the DEFLATION WARNING SYSTEM.
Step 7 – To activate the deflation warning system, go to SOURCE and choose it.
Step 8 – After entering the PIN, scroll down to INITIALIZE and press SOURCE.
Step 9 – A message will show up asking if you wish to go forward, press the down arrow for yes.
Step 10 – After removing the wheel cover and resetting the TPMS, the warning light should turn off. To close down the menu and return to the dashboard’s clock display, press MENU.
How to Reset Your Honda Civic’s TPMS Using the TPMS Reset Switch
2012 Honda Civic owners who are looking for an easy way to reset their TPMS should check the manual or ask friends with 2012 civics before they search online.
There’s no guarantee that there will be instructions on how to do so, but if one does exist it’ll only take a few minutes from start!
The procedure can seem daunting at first glance because of all those airbags. But don’t worry; just follow these steps:
Step 1 – Fill the tires with air to the proper pressure for your car.
Step 2 – Locate the TPMS button. In Honda vehicles, this reset button is typical to the left of the steering wheel.
Step 3 – While still holding down the TPMS button, press and hold it until it switches from green to yellow.
Step 4 – The system will re-calibrate.
Step 5 – After turning the engine off and restarting it, the TPMS will be reset.
Frequently Asked Questions
Is the Honda Civic 2012 Equipped With TPMS?
Yes, the Honda Civic 2012 has a TPMS (tire pressure monitoring system).
The tire pressure monitoring system was installed as standard on all Honda Civics beginning in 2008.
Prior to 2008, only certain models had tire pressure monitoring equipment.
Where Is The Tire Pressure MS Placed On My Honda Civic 2012?
The TPMS reset button is on the left side of your Honda Civic’s steering wheel.
What’s The Recommended Tire Pressure For A Honda Civic 2012?
You should inflate your entire car tire pressure to the correct level in order to keep you safe and secure while driving.
To ensure that you are driving safely and protecting your automobile tires, make sure all front and rear tires have the correct air pressure.
The ideal tire pressure for a Honda Civic 2012 is 32 psi.
Is It Okay To Drive With The TPMS Warning Light Illuminated?
You should not drive with the TPMS light on as you may be driving on tires that are unsafe.
If you ignore the tire pressure light, you may cause damage to your tires over time.
Also, the TPMS may need to be reset so the system can correctly monitor the pressure in all of the car tires.
On a 2008 Honda Civic, How Do You Reset The Tire Pressure Monitoring System?
The procedure for resetting the TPMS varies depending on the model of the car.
To reset the TPMS in a Honda Civic, find the reset button (next to the lower-left knee bolster) and press and hold it until the light blinks twice.
After that, simply turn off the engine and restart it when you’re ready to go.
Final Thoughts
The TPMS in your Honda Civic 2012 is there to tell you when your tires are losing pressure so you don’t have to.
When one or more of the sensors detects a lack of air in a tire, a warning light will come on in the dash.
You will need to reset the TPMS after replacing one or more tires or inflating them.
We’ve outlined how to reset the TPMS in your Honda Civic 2012, and we hope you found our step-by-step approach helpful – that annoying warning light might be of your dashboard in a matter of minutes!
