This article provides instructions on how to reset Honda Civic oil light.
As soon as your Honda Civic’s warranty ends, it’s time to think about slashing your costs.
With a few simple tools and one of our how-to guides, you’ll be able to perform an oil change on your own with no issues.
The dashboard will be clear of distractions once the oil maintenance lamp has been reset, and you will be reminded when it is due for another oil change.
Keep reading if you’re interested in learning how to reset the oil light of the Honda Civic on any of the models that have this feature.
Why Does My Oil Maintenance Light Turn On?
When it comes to the oil maintenance light, it is only addressed once in the introduction, and that is because of the impending oil change cycle.
However, there are two more scenarios in which this can occur, and if they are not handled properly, they can result in catastrophic engine failures.
Even if you are positive that the problem is due to the oil change, it is still recommended that you go through this section since, if the problem occurs, you will need to respond immediately to prevent engine damage from occurring.
Oil Level Is Running Low
As soon as you notice the oil maintenance light illuminates while you’re driving, pull over as soon as possible.
Because of the accumulation of heat with each engine cycle, you run the danger of irreparable damage to your engine.
Immediately after stopping, allow the engine to cool down sufficiently to provide an accurate reading of the oil level in the engine.
The engine should not be started again until the oil level has been reduced to the bare minimum, and you should use a generous amount of oil to replace the reservoir.
Keeping an eye on the oil level every few weeks and before significant travels is a sensible method to keep the automobile in good condition.
It will assist in making a more accurate diagnosis of the problem because a variety of circumstances might cause a decline in oil levels.
Oil Pressure Is Too Low
A failed oil pump may result in inadequate circulation in the system, which is just as harmful as not having enough.
By examining the levels of oil, you can rule out the possibility of a lack of oil as a contributing factor, reducing the search for the oil pump.
Nothing will be left to chance, and no effort should be spared when it relates to these matters.
In comparison to the expense of fixing an engine damaged by a lack of oil, the fees associated with a tow truck and a mechanic are negligible.
How To Reset Honda Civic Oil Light: A Step-By-Step Guide
Now that we’ve covered the most important situations that every driver should be aware of, we can move on to the process of resetting the oil maintenance light.
Because the procedure changes between Civic generations, let’s start with the most recent model and work our way down.
10th Generation Honda Civic (2015-2021)
It is possible to reset the oil light on a tenth-generation Honda Civic with different methods, and the method you should choose will depend on the trim level of your vehicle.
1. Models With Info Display
Maintenance lights can be reset using the trip knob on the wheel-mounted buttons or steering column, depending on which method is used to navigate through the options that appear in the speedometer.
Start the car by turning the key in the ignition.
To navigate through the menus, use the steering wheel or trip controller controls to select the Oil life menu, which is represented by an oil can icon.
Select this category from the drop-down menu.
To reach the reset mode, press and hold the select button for a total of 10 seconds.
Scroll through the maintenance items and make sure the oil and any other items you’ve modified are back to their original settings.
2. A Touchscreen Model
If your Civic is equipped with a center-mounted touchscreen, you may use it to reset the oil maintenance indicator in addition to controlling the audio, climate, and navigation.
Start the car by placing the key in the ignition.
Settings can be accessed from the Home menu.
Select the Vehicles subcategory.
Select Maintenance Information from the drop-down menu.
Select the option to Reset Items from the drop-down menu.
Select the oil and any other items that have been modified.
9th Generation Honda Civic (2011-2015)
The trip knob or buttons will be used to access the maintenance menu, which will be displayed on the dashboard of the ninth generation.
Start the engine by turning the key in the ignition.
For 5 seconds, or until the display begins to blink, hold down the reset button on your keyboard.
Hold pressing the reset button for another 10 seconds, or until the oil life indicator reaches 100 percent.
An alternative method is to visit the engine Oil life menu using the steering-mounted controls and reset it from there.
The trip buttons, which are situated on the left side of the dashboard, beneath the air conditioning vent, will be used to navigate through the menus presented on the driver’s screen.
Set the ignition key to the second position or start the vehicle.
Continue to press the button SEL/RESET until the menu of Oil life displays on the screen.
Press and hold the button of SEL/RESET for a total of 10 seconds or until the display begins to blink.
Hold the button SEL/RESET down for another 5 seconds, or until the oil life indicator reads 100 percent.
7th Generation And Older Honda Civic (1991-2005)
The following steps are used to clear the oil maintenance light on Civic vehicles dating back to the seventh generation:
In the ignition lock, insert the key.
The trip button is located beneath the speedometer. Press and hold it for three seconds.
The key should be turned to “On.” Keep the engine from starting if possible.
Keeping the trip button depressed will cause the oil light to go out.
If you have a Honda Civic, the process of resetting the oil maintenance light can be completed in less than a minute.
You should be aware that it is a useful indicator of engine health and should only be reset after oil changes.
To guarantee a long service life for your Honda Civic, keep an eye on the oil level and change the oil filter regularly.
Jeffrey Bryce is an experienced motorcycle rider with years of experience caring for motorcycles. His natural fondness for motorcycles have made him come up with LetsGoForARide.com, which is dedicated to answering and teaching you how to care for your bike with the care it requires. LetsGoForARide is the one of his important lifework in reaching out to communities of motorcycle enthusiasts on how to take care of their bike and choosing the correct spare part.