Maintenance Light On Honda Accord

by

Jeffrey
August 10, 2022
163 Views

The maintenance light on honda accord turns on when it’s time to change your oil.

The older models had an Oil Life Scale, which measured how well you drove and told if there were any issues with engine lubrication based on 7500 miles worth of data from both metrics combined; but now all new cars come equipped with a more accurate reading thanks to their Oil Life Monitor system!

Honda Accord maintenance is easy to reset.

If your engine warning light has been on for more than 45 days and you haven’t changed the oil, simply disconnecting and reconnecting will clear it up!

There’s no need to do any expensive repairs or take off work just because of this pesky little icon on my dashboard.

Maintenance Light On Honda Accord

Honda Accord Tenth Generation (2017 – Present)

Honda’s newest update to the Accord makes it even easier than before!

The system is straightforward and will help you avoid those pesky maintenance lights.

Resetting your car’s monitor isn’t as hard now, with these simple steps:

  • With the ignition switch in the “ON” position, start the engine without turning it on.
  • To access the Main menu, press and HOLD the Home button on the steering wheel.
  • Selector wheel below the Home button to go to the Maintenance menu.
  • To go into Reset mode, simply press and hold the Selector wheel for 10 seconds.
  • Find the maintenance reminder you wish to cancel or reset all of them through All Due Items.

Honda Accord Ninth Generation (2012 – 2017)

The Honda Accord is a popular car for people who want something reliable, comfortable, and safe- but also affordable.

The dashboard of this vehicle features an easy-to-use knob which can be found on the right side as you look towards your seats from behind them (in the back).

This particular control allows drivers more options when it comes time reset their maintenance light – giving them peace of mind that all systems are working properly!

When you turn the ignition on without starting up, there are two methods for turning it off.

The first is by pulling off your brakes and pressing twice at any point during startup or while in motion; this will select ‘trip mode’.

While inside of this menu all functions can be accessed by either clicking via mouse cursor over the indicated item(s) or tapping if they’re listed as options next to each function title along the bottom line- “Output”.

Maintenance Light On Honda Accords

Honda Accord Eighth Generation (2007 – 2012)

The Honda Accord’s trip knob and small screen on the bottom of its instrument panel are used to reset any maintenance lights that might have been triggered by auto-related activities such as driving too much or taking long routes.

With the key in Ignition, turn on but don’t start the engine.

Navigate menus until finding the Oil menu and press the “Trip knobs” button twice; this will show all that setting is currently selected for each mode (such as Hill Descent Control).

Press again onto the entering new values screen where you can enter desired altitude & cruise control settings if needed- then select them both simultaneously with one trip knob hold!

Honda Accord Seventh Generation (2002 – 2007)

With the warning light in front of you, go into settings and select Maintenance.

This will bring up an options menu with a few different tabs including Oil Change History where users can find their most recent service records or print them off if needed before heading over to get tuned up!

To turn off your vehicle, first put it in gear and press the ignition button. 

Once you have done that keep holding onto that knob for 10 more seconds while turning both keys at once back to their second position (which will be opposite from when they were turned on).

Finally, release all three buttons together then repeat these steps one last time before letting go with no forgetting about how long each step took!

Honda Accord Sixth Generation (1998 – 2002)

The sixth generation shares the process with its successor, but there are some minor changes to how it all works.

To start the car, first, place your key in the ignition lock and press RESET.

Next, hold down both select buttons until they glow yellow then turn them back to green (you can also do this step by pressing only one).

When you see “Reset” appear on the screen release pressure from any button completely but do not remove gloves!

Now enter motorcycle mode or automatic transmission if applicable insert the vehicle’s parking brake applies fully apply throttle remain stationary while watching the gauges.

Honda Accord Older Generations (1976 – 1998)

The maintenance light on your car is a reminder that you need to take care of it.

It can be tricky figuring out how, but luckily this article will give some tips for resetting the warning signs in order and getting back road-ready!

The maintenance light on your car is a reminder that you need to take care of it.

It can be tricky figuring out how, but luckily this article will give some tips for resetting the warning signs in order and getting back road-ready!

Summary

Honda Accord maintenance is easily one of the most overlooked aspects when it comes to owning a car.

If your vehicle has been outfitted with an automatic transmission, I recommend that you leave this task up to professionals in order to avoid any warranty issues or inaccurate readings from lights on vehicles which could lead them to believe something needs fixing before anything does!

Jeffrey

Jeffrey Bryce is an experienced motorcycle rider with years of experience caring for motorcycles. His natural fondness for motorcycles have made him come up with LetsGoForARide.com, which is dedicated to answering and teaching you how to care for your bike with the care it requires. LetsGoForARide is the one of his important lifework in reaching out to communities of motorcycle enthusiasts on how to take care of their bike and choosing the correct spare part.