Tail Lights Not Working But Brake Lights Are
Taillights are a safety feature on vehicles.
They inform other drivers of the vehicle’s rear edge so that they may gauge its size and form correctly.
Sometimes I wonder why my tail lights not working but brake lights are.
In this article, we will learn more about this problem and how to fix it.
Faulty Tail Lights
It could be a fuse issue, a problem with the wiring, or a problem with the bulbs.
If you’re not sure what the issue is, it’s best to take your car to a mechanic or an auto electrician to get it checked out.
In the meantime, here are a few things you can try to troubleshoot the problem.
First, check the fuse for the taillights.
If it’s blown, replace it with a new one and see if that fixes the problem.
If not, then next you’ll want to check the wiring.
Make sure all of the connections are tight and there are no loose wires.
If everything looks good there, then the issue is likely with the bulbs.
Try replacing them with new ones and see if that does the trick.
If you’re still having trouble, then it’s best to consult with a professional to get to the bottom of the problem.
They can help you diagnose the issue and get your tail lights working again in no time.
Bad Tail Lights Fuse
If your car’s taillights have stopped working, it is likely because of a blown fuse.
Replacing a blown fuse is easy to do and only takes a few minutes.
Here’s what you need to know about troubleshooting and fixing a bad tail light fuse.
The most common symptom of a blown tail light fuse is that the taillights will not turn on when the headlight switch is turned on.
In some cases, the brake lights may also be affected.
If the fuse is completely blown, all of the lights on the rear of the car will be out.
A blown tail light fuse is usually caused by a short circuit or an overload of current.
This can happen if there is a problem with the wiring, the bulbs, or the sockets.
It can also be caused by a loose connection.
The best way to fix a blown tail light fuse is to replace it with a new one.
You can find replacement fuses at most auto parts stores.
Be sure to get the right size and type of fuse for your car.
Once you have replaced the fuse, check the connections and make sure they are tight.
Also, check the bulbs to see if they need to be replaced.
The best way to prevent a blown tail light fuse is to keep the wiring and connections in good condition.
Inspect the wiring periodically for signs of wear or damage.
Also, be sure to use the proper size and type of bulb in your tail lights.
Finally, make sure the sockets are tight and not loose.
Bad tail lights can be a major annoyance-not to mention dangerous.
But by troubleshooting and fixing a bad fuse, you can quickly and easily get your tail lights working again.
Faulty Switch
The most frequent reason for a car’s rear lights to stop functioning is because of an issue with the switch.
The most typical symptom of a faulty tail light switch is that the taillights will not turn on when the headlight switch is turned on.
In certain situations, the brake lights might also be damaged.
If the control is destroyed, all of the vehicle’s rear lights will be out.
A bad tail light switch is most often the result of a short circuit or overloading of current.
This might be due to a fault with the wiring, bulbs, or sockets.
It’s also possible that something is disconnected.
Replacing a bad tail light switch is the easiest method to repair it.
You may get new switches at most automobile parts stores.
Bad Light Bulbs
One reason why your taillights are not working is that the bulbs are already bad.
As soon as you observed symptoms, always consider checking your bulbs if it is already faulty.
When replacing light bulbs, be sure to think about the size and form of your previous bulbs.
Make sure everything is suitable so that you won’t have any more difficulties putting in the new ones.
Wiring Problem
If your taillights are not working, there may be a problem with the wiring.
Check the connections and make sure they are tight and secure.
Loose connections can cause problems with the electrical system.
Once you have checked all of the connections, try turning on the lights again.
If the problem persists, you may need to replace the wiring.
You can buy replacement wiring at most auto parts stores.
Be sure to get the correct size wire for your vehicle.
Once you have replaced the wiring, check the lights again to see if they are working.
If you’re not sure what you’re doing, seek assistance from a specialist to prevent future problems, especially if your automobile’s wiring.
Bad Sockets And Connectors
When your taillights go out, it is usually because of a bad socket.
The socket is the part of the taillight that connects to the bulb.
Over time, the socket can become corroded or damaged, causing it to lose its connection with the bulb.
This can cause the taillight to stop working.
To fix a taillight with a bad socket, you will need to replace the socket.
To do this, first, remove the old socket from the taillight assembly.
Then, install the new socket in its place.
Once the new socket is in place, connect it to the bulb and test it to make sure it is working properly.
If your taillights are still not working after replacing the socket, there may be a problem with the wiring.
Inspect the wiring to see if there are any loose connections or damaged wires.
If you find any issues, repair them as necessary.
Once the wiring is fixed, your taillights should be working properly.
Bad Ground Connection
A bad ground connection is one of the most common problems with taillights.
This can happen if the ground wire becomes loose or corroded.
If this happens, the taillight will not work properly.
To fix this problem, you will need to clean the ground wire.
First, disconnect the ground wire from the taillight.
Next, use a wire brush to remove any rust or corrosion from the wire.
Finally, reconnect the ground wire to the taillight.
If the ground wire is damaged, you will need to replace it.
This is a more difficult repair, and you may need to take your car to a mechanic.
How Often Do I Change Taillight?
How often you need to change your taillight bulbs depends on how often you use your car and the conditions you drive in.
If you use your car regularly, you should check your taillights every few months to make sure they are working properly.
If you only use your car occasionally or if you live in an area with harsh weather conditions, you should check your taillights more frequently.
It’s important to change your taillight bulbs as soon as they start to show signs of wear or damage.
This is because damaged bulbs can cause problems with your car’s electrical system and lead to more costly repairs.
Additionally, worn-out bulbs can make it difficult for other drivers to see your car, which can increase the risk of an accident.
Do My Tail Lights Need To Be On During The Day?
In most states, it is required by law to have your tail lights on during the day.
This is so that other drivers can see your car more easily.
Additionally, tail lights help make your car more visible at night.
If you are unsure whether or not your state requires tail lights to be on during the day, you can check with your local department of a motor vehicle.
Additionally, you can consult your car’s owner’s manual for more information.
Dim Tail Lights
When driving at night, it is important to have properly functioning taillights.
It helps other drivers see your car from behind, and they also signal to drivers when you are braking or turning.
Unfortunately, dim tail lights are a common problem.
Here are some tips on how to fix dim tail lights.
First, check the bulbs.
If the bulbs are burned out, they will need to be replaced.
Second, check the wiring. If the wires are loose or damaged, they will need to be repaired or replaced.
Finally, clean the lenses.
Dirt and debris can build up on the lenses and cause the tail lights to appear dimmer than they actually are.
If you have tried all of these things and your tail lights are still dim, you may need to replace the entire light assembly.
This is a more expensive repair, but it will ensure that your tail lights are working properly.
Tail Lights Is Not Turning Off
One of the most common problems with tail lights is that they do not turn off.
This can be a problem if you forget to turn them off when you park your car, as it will cause your battery to drain.
Additionally, it can be a safety hazard if your tail lights are on while you are driving.
There are a few things you can do to fix this problem.
First, check the switch. The switch may be damaged or corroded.
If so, it will need to be replaced. Second, check the wiring.
If the wires are loose or damaged, they will need to be repaired or replaced.
Finally, clean the contacts. Dirt and debris can build up on the contacts and prevent the tail lights from turning off.
If you have tried all of these things and your tail lights are still not turning off, you may need to replace the entire light assembly.
This is a more expensive repair, but it will ensure that your tail lights are working properly.
