Toyota Sienna Maintenance Required Light – How To Easily Reset
Sienna has shown its strength and long-term service life in just four generations over 24 years.
Toyota sienna maintenance required light and to warn and remind the owner about necessary maintenance in order to keep the minivan in as good of a condition as possible.
I will focus on resetting the oil since it is by far the most common scenario, but these techniques may also be used for any other cycle.
Fourth Generation Toyota Sienna (2020 – Present)
The newest Toyota Sienna maintenance light may be reset using the navigation buttons on the right instrument cluster of the center-mounted display and of the steering wheel, which is new to this generation.
The fourth generation, as a fresh model, undoubtedly has a lengthy guarantee period with several conditions.
Resetting the maintenance light is a simple procedure that might render your vehicle’s warranty null and void.
Before proceeding, check with the dealership or an authorized mechanic to ensure this is not dangerous.
- Turn the key On, but do not start the engine.
- Wait for the Sienna logo to vanish from the dashboard display.
- Use the steering-mounted controls to go through settings until you find Maintenance Reset.
- Press the center button of the navigation controls to select the menu. If you inadvertently choose an incorrect option, use the back key to return to your previous selection.
- Follow these steps to reset the maintenance light: Select Yes from the menu prompt when prompted.
Toyota Sienna Third Generation (2010 – 2020)
The third generation is one of the most successful minivans in history, having been on the market for ten years.
Depending on the specific model year, your vehicle may still be covered by warranty at this point, so double-check if it is permissible to reset the maintenance light.
- Turn the key On or start the engine.
- The ODO TRIP button, which may be found near the speedometer, is used to browse the middle display.
- Once you have found the ODO menu, turn off the ignition.
- While driving, press and hold the trip button. Do not let go through the following procedures.
- Once the ignition is turned on, wait for the Engine Start procedure to appear.
- When the engine is turned on, you must press and hold the start button until the maintenance light goes out.
- Remove the trip switch and ignition key.
Second Generation Toyota Sienna (1998 – 2003)
This uses the odometer knob and the little display inside the rev gauge on the instrument panel to measure kilometers.
Here is how to accomplish it:
- Set the ignition switch on, and wait for the instrument panel to come on.
- Turn the odometer knob to access the menu until you have located an ODO reading.
- Turn off the ignition.
- Turn the ignition back on and press and hold the odometer knob.
- You are done! When the odometer shows zero, the maintenance light has been reset.
Toyota Sienna First Generation (2003 – 2010)
The Sienna’s maintenance light is also on earlier models, so I will show you how to reset it:
- Without starting the engine, turn the ignition on.
- Use the trip knob and tiny display on the driver’s dash to access the menus until you discover the ODO reading.
- Turn the key off and then hold down the trip button.
- Turn the ignition back on. The display will show a series of ‘- ‘ symbols until the original ODO reading is displayed, with each sign disappearing one by one.
- The maintenance light has been reset, and you can let go of the ODO knob.
Frequently Asked Questions
Do I require any equipment for the task?
Any time of vehicle, regardless of generation, you will not need any tools to reset the maintenance light; all you will need is the ignition key.
Is there anything you should know before you begin?
It is fine and risk-free if you really changed the oil since it is a completely safe and risk-free operation.
How long will it take?
It should not take more than a minute to repeat the procedure, even if you skip the maintenance menu.
Summary
Maintenance lights might be annoying, especially if you’re following your own maintenance routines rather than what the car suggests.
Resetting it is a simple process, so the next time it displays up, you can do it in a matter of seconds.
I hope you found this post informative, and if you’d like to learn more, check out our other articles!
